Nippon Weight Indicators & Controllers

Load 2000 is used for accurate weight measurement & controls. Load 2000 provides precise excitation voltage to the load cell.

The load cell o/p is measured & displayed. Instrument is provided with 2-Relay o/s.

S.S.R. o/p is provided for faster CLUTCH/BRAKE operations.

Load 2000 is widely used in Dozing, Packaging, Textiles, Winding …etc…where accurate WEIGHT measurement is

Input	From 2 wire transmitter (4 to 20 mA), 24VDC available
Range	User selectable measuring ranges Programmable from -1999 to +1999, with decimal point. freely configurable from most to least significant digit.
Accuracy	±least count ( i.e. 1 or 0.1)
Setting	Easy setting of measurement ranges & High/Low limits by Feather-touch, elegant, long life & user friendly membrane key pads. No trimpots to be touched.
Display	Bright seven segment, 4 digits for parameter & 4 digits for status.
Limits	High & Low Limits
Controls	On-Off, TIme Proportional, PI control action
Dead Band	Programmable
Logic	Heater or Alarm Programmable
Output	2 Relays corresponding to each limit rated 230 V / 6 Amp.
Retransmission O/P	user programmable 0-20mA/4-20mA, On request
Computer Interface	RS232 or RS485 available
Password	Lock facility to avoid tampering
Design	Modular, Sturdy & Wireless design
Noise Immunity	EMI/RFI interference is suppressed by MOV's & R-L-C filters
Supply	90-260 VAC, 50Hz
Ambient Conditions	Temp. 55°C& Relative Humidity 99%
Box	Height - 96 mm, Width- 96 mm, Depth - 150 mm, DIN size
Notes	1. Control o/p with PI control action & 4-20 mA Control o/p on request 2. "Soaking time" function on request 3. S.S.R. o/p available.