Nippon 2020D Digital Temperature Controller

006
006

Nippon 2020D Digital Temperature Controller

Nippon 2020

Setpoint and process both are displayed simultaneously. The process display is 12.5mm height.
The setpoint display is 8mm height. The power supply is 90-260 VAC.
NOTES
1. ON-OFF Control: Relay is on upto the set temperature and cuts off at the set point. System temperature will come down and again relay will go on at temperature 2 °C below the set point. Same function is repeated. Adjustable dead band is provided for specific application. Time-Proportionating Control : Relay will be ON and OFF in band of ±2 °C of set-point. ON-OFF : time will adjust as per the heat requirement of the system. Of course total time cycle will be of 15 seconds.
2. 4½ digit Temperature Indicator/Controller Nippon 2020A.
3. Contact factory for supply volts of 90 – 260 VAC & retransmission output

  • Specifications
Table A
Model No. Sensor Range Calibration Accuracy Resolution °C / °F
nippon 2020A Pt-100 (2,3 wire) -100.0 to 600.0 °C -148.0 to 1112.0 °F 0.25% 0.1
nippon 2020 Pt-100 -100.0 to 199.9 °C -148.0 to 199.9 °F 0.25% 0.1
nippon 2020 Pt-100 -100 to 600 °C -148 to 1112 °F 0.25% 1
nippon 2020 Iron/Constantan (J) -100 to 600 °C -150 to 1112 °F 0.10% 1
nippon 2020 Chromel/Alumel (K) -80 to 1200 °C -112 to 1999 °F 0.70% 1
nippon 2020 Pt/Rh (R,S) +900 to 1600 °C +1652 to 1999 °F 0.50% 1
 
Technical Specification
Principle
 Input signal is signal conditioned, linearised and amplified.  It is compared with the set point and accordingly relay operates.
Inputs  J,K,R,S,T and other thermocouples, R.T.D's like Pt-50, Pt-100 (2~3 wire), 0-1VDC, 4-20 mA... Etc.
Range, Indicating  Refer Table - A
Accuracy, Resolution Ambient Compensation Automatic
Setting By push button - COARSE/FINE pots or by membrane key - trimpot
Setting Accuracy Better than 0.2%
Output  Relay contacts rated at 230V/6A.
Control ON-OFF or Time-Proportional (Refer Note on back side)
Sensor Open Protection  Built-in Indicates ' 1', Relay cuts-off.
Ambient Temperature  0-55 °C
Supply 230 VAC ±10%, 50 Hz standard, 90-260 VAC on request.
Box Size 96 (H) X 96 (W) X 180 (D) or 72 (H) X 72 (W) X 110 (D) or 48 (H) X 48 (W) X 100 (D) in mm
Note  24 VDC for loop power 4-20 mA input on re
Quick Enquiry
close slider