Nippon Multi set point indicator / controller

Nippon Multi set point indicator / controller

  • Single input
  • 8 set points
  • 8 relay outputs.
  • 96H X 192W DIN Size
  • Modular design
  • Specifications
Input From 2 wire transmitter (4 to 20 mA), 24VDC available
Range User selectable measuring ranges Programmable from -1999 to +1999, with decimal point. freely configurable from most to least significant digit.
Accuracy ±least count ( i.e. 1 or 0.1)
Setting Easy setting of measurement ranges & High/Low limits by Feather-touch, elegant, long life & user friendly membrane key pads. No trimpots to be touched.
Display Bright seven segment, 4 digits for parameter & 4 digits for status.
Limits High & Low Limits
Controls On-Off, TIme Proportional, PI control action
Dead Band Programmable
Logic Heater or Alarm Programmable
Output 2 Relays corresponding to each limit rated 230 V / 6 Amp.
Retransmission O/P user programmable 0-20mA/4-20mA, On request
Computer Interface RS232 or RS485 available
Password Lock facility to avoid tampering
Design Modular, Sturdy & Wireless design
Noise Immunity EMI/RFI interference is suppressed by MOV's & R-L-C filters
Supply 90-260 VAC, 50Hz
Ambient Conditions Temp. 55 ºC& Relative Humidity 99%
Box Height - 96 mm, Width- 96 mm, Depth - 150 mm, DIN size
Notes 1. Control o/p with PI control action & 4-20 mA Control o/p on request 2. "Soaking time" function on request 3. S.S.R. o/p available.
Quick Enquiry
close slider