Nippon Universal Process Controller / Indicator in FLP Housing

Nippon Universal Process Controller / Indicator in FLP Housing

  • Suitable for hazardous atmosphere
  • Toughened glass window
  • 24 VDC loop power supply
  • 90-260 VAC supply
  • 2 Relay outputs
  • Specifications
Input

From 2 wire transmitter (4 to 20mA), 24 VDC available

Range User selectable measuring ranges programmable from -1999 to +1999, with decimal point freely configurable from most to least significant digit.
Accuracy ± least count (1 or 0.1)
Setting Easy setting of measurement ranges & high/low limits, by feather-touch, elegant, long life, & user friendly membrane key pads. No trimpots to be touched.
Display Bright 7 segment, 4 digits for parameter & digits for status.
Limits High & Low limits
Controls On-Off, time proportional, Pl control action.
Dead Band Programmable
Logic Heater or alarm programmable
Output 2 Relays corresponding to each limit rated 230 V/6 Amp
Retransmission O/P User programmable 0-20mA / 4-20 mA. On request
Computer Interface RS232 or RS485 available
Password Lock facility to avoid tampering
Design Modular, sturdy & wireless design
Noise Immunity 1EMI RFI interface is suppressed by MOV's & R-L-C filters.
Supply 90-260 VAC, 50 Hz
Ambient Conditions Temperature 55ºC& Relative Humidity 99%
Box 250H X 250W
Note 1. Control o/p with Pl control action & 4-20 mA control     o/p on request.
2.'Soaking time' function on request.
3. S.S.R. o/p available
Quick Enquiry
close slider